10+ Arduino Programming Books for Beginners – A Complete Review

Are you planning to buy an Arduino programming book? Then a lot of question comes to mind like:

• Which is the best arduino programming book?
• What are some good books for learning Arduino?
• Which is the best book to start learning Arduino?
• Which book is good for learning Arduino programming
• Best Books on Arduino for self-learning

We reduce your effort and listed different books on arduino programming that are useful to beginner and want to learn the Arduino programming step by step.

How we reviewed arduino programming books: We consider some points before writing a review that is listed below.

• Projects covered in the book
• Tutorials covered
• Different Sensor Interfacing
• Book Written for beginner and intermediate both
• Way of writing the content
• And finally, we were given a rating

For getting the best book to learn arduino programming read the  Key Highlights of The Books and rating.

Exploring Arduino: Tools and Techniques for Engineering Wizardry

BY (AUTHOR): Jeremy Blum
Rating: 8.5

This book is best Arduino books for beginners and for an advanced level of the user. The book starts with basic and end with the advanced level of projects. It covers some best interfacing like SD card, RTC, Xbee, SPI, I2C and internet connectivity with arduino.

Key Highlights of The Book:

• Working with LED’s
• PWM
• RGB LED Night Light
• Make your own analog sensor
• Driving DC Motor
• DC Motor Speed Control using PWM
• DC Motor H Bridge Control
• Servo Motor Control
• Creating Tone and Piano Project
• USB and Serial Communication
• Emulating a Keyboard
• Controlling a Light with Shift Register
• I2C Protocol
• SPI Bus
• LCD interface
• Xbee interfacing
• Interface wirelessly with Computer
• Hardware and Timer interrupt
• SD Card interfacing
• RTC interface
• Arduino with Internet Connectivity

This arduino programming book got the highest rating in the article. And definitely it is the best arduino books for beginners to learn arduino programming step by step.

Arduino Sketches: Tools and Techniques for Programming Wizardry

BY (AUTHOR): James A. Langbridge
Rating: 8

This book is best for the beginner and expert both. It covers the various Arduino boards and explaining also. It covers how to use different libraries and how to create your own. It covers different practical projects that are useful for everyday use.

Key Highlights of The Book:

• Communicate through Ethernet, WiFi, USB, Firmata, and Xbee
• Learn how to create the library, import and update also
• Play Audio from Arduino
• Sending Keyboard Signal to Computer and Cursor Control
• Covers Major Communication Protocol like Serial, SPI, Wire, WiFi, Firmata, GSM  and Ethernet
• Interfacing of LCD, TFT, SD Card, Servo and Stepper
• Device Specific Library Audio, Scheduler, USB host, Esplora

Arduino for Beginners: Essential Skills Every Maker Needs

BY (AUTHOR): John Baichtal
Rating: 8

This is also a good arduino programming book includes basic and intermediate arduino projects.

Key Highlights of The Book:

• Coloured Guide
• Learn Breadboarding and Soldering tips
• Laser/infrared home security system
• Bluetooth  and XBee controlled doorbells
• Learn to create useful, reliable Arduino programs from scratch
• Arduino ’s, temperature, flex, and light sensors interfacings
• Make projects that react with the surrounding
• Plant-watering robot
• Control DC motors, servos, and stepper motors
• Real Time Clock(RTC) to Measure Time
• Build pro-quality projects for your home
• Mood Light Lamp Project
• Liquid Flow Control using solenoid valve
• Make a pressurized reservoir Project
• Plant Watering Robot
• Learn the basic tools for making projects
• Automatic Ultrasonic night lamp project
• Making Noise
• Digital Clock Project
• Indoor Wind Chime Project
• Bubble Bot Project

Programming Arduino Next Steps: Going Further with Sketches

BY (AUTHOR): Simon Monk
Rating: 7

The book contains introductory chapters explains what is arduino, how to program the arduino , what is sketches and how to write the bootloader into the arduino. Also covers some basics of arduino programming like if-else, functions and array. So it’s a good book for the beginner to start learning arduino.

Key Highlights of The Book:

• 75+ example program mentioned in the book are available for download
• USB Programming to emulate mouse and keyboard features
• Learn Serial communication using I2C, 1-Wire, SPI, and UART
• Learn to boost performance by writing the time efficient code
• How to minimize power consumption and memory
• Perform digital signal processing
• Arduino Internet Programming
• Use of Timer and Interrupts
• TEA5767 Arduino FM Radio Project
• Arduino to Arduino Communication
• DS1307 Real Time Clock
• GPS Interfacing

Learn Electronics with Arduino: An Illustrated Beginner’s Guide to Physical Computing (Make)

BY (AUTHOR): Jody Culkin and Eric Hagan
Rating: 6.5

This is a good book for an absolute beginner. The book has detailed chapters covering all the aspects. The book is well indented and coloured images make your learning very easy.

Key Highlights of The Book:

• Every topic has good explanation and possible practice
• Switch and LEDs interfacing
• Analog and Digital Interfacing
• Analog PWM Creation
• Analog with Speaker
• Analog with Potentiometer
• Single and Multiple Servo Motor Interfacing
• Serial Communication

Beginning C for Arduino, Second Edition: Learn C Programming for the Arduino

BY (AUTHOR):Jack Purdum
Rating: 6.5

A good book for those who have no prior knowledge of C and microcontroller. The book covers good numbers of C chapters, learn how to use it for microcontroller programming and creating your own libraries.

Key Highlights of The Book:

• Covering detailed C tutorials
• Serial Peripheral Interface Protocol(SPI)
• Interrupt and Interrupt Service Routine(ISR)
• Ultrasonic Sensor Interfacing
• Introduction of OOPs
• Seven Segment Serial Control

Arduino: Step-By-Step Guide To Master Arduino Hardware And Software

BY (AUTHOR): Mark Torvalds
Rating: 6

Key Highlights of The Book:

• Even you don’t know anything about arduino you can use this book
• Different Projects
• Every hardware used in the project is explained
• Covered Internet of Things and Arduino Ethernet shield Project
• Explained every component before going for project making
• Exercises and Quizzes at the end of the chapters
• Controlling Light Intensity using Potentiometer
• Photoresistor as Light Sensor
• Controlling LED with PWM
• Arduino Serial Interface and Temperature Sensor Interface
• LED ON/OFF by computer using serial interface
• DC and Servo Motor Control
• LCD Interface
• Keypad Interface to take user input

Learn to Program in Arduino C: 18 Lessons, from setup() to robots

BY (AUTHOR): William P. Osborne
Rating: 6

This book contains the basic of c programming and some medium level projects. The way of explaining the content is good. It has few good projects.

Key Highlights of The Book:

• More than 250 colour photos, illustrations, and diagrams
• Learn to identify common electronic components
• Sample codes
• Working with Serial Input
• Servo Control
• DC Motor Control
• Sony IR Protocol
• Wireless control of tone using IR Remote
• Robot Control using IR Remote
• Robot Assembly
• Learn to create PCB
• Making PCB

Arduino Programming in 24 Hours

BY (AUTHOR): Richard Blum
Rating: 6

If you have a limited time to learn arduino this is the best book. The book covers 24 lessons you can cover in less than in an hour. The book includes step by steps tutorial and projects with the basic learning of c programming.

Key Highlights of The Book:

• Step-by-Step instructions
• Quizzes at the end of chapters to test your knowledge
• By the Way: provide brief insight on the topic or discussion
• Did You Know?: tips provides easier way to do the task
• Watch Out! cautions alert you to possible problems
• Know the right arduino and accessories
• Setup the arduino IDE, Driver and Arduino Board
• Creating first arduino sketch and uploading
• Master C syntax, decision control, strings, data structures, and functions
• Use pointers to work with memory—and avoid common mistakes
• Arduino’s EEPROM Interfacing
• Arduino SD card interfacing
• Create your own arduino library
• Analog and Digital Input and Output
• Hardware and Software Interrupt and Handling it
• SPI Communication
• I2C Communication
• Working with analog and digital Sensors
• Motor Interfacing
• Arduino LCD interfacing
• All about ethernet shield and using it for IOT

Master Arduino From A to Z

BY (AUTHOR): Julien G. Louage
Rating: 5.5

This book also explaining the content from very basic. It contains 26 labs and 16 chapters. This lab project is very basic to understand for the beginners.

Key Highlights of The Book:

• Different Experiments on LEDs
• Making Sound
• Working with RGB Led
• Working on Serial Monitor
• Sensing Lights
• Ultrasonic Sensor
• Stopwatch
• Motor Control like DC, Servo and Stepper
• Accelerometer and Gyro Module MPU-6050

Programming Arduino: Getting Started with Sketches

BY (AUTHOR): Simon Monk
Rating: 5

The main emphasis of the book on the beginners. It has a good number of chapters on the c programming. The number of projects is less.

Key Highlights of The Book:

• Internet of Things
• Arduino Hardware Fundamentals
• Convers Basic of C
• Display Interfacings like OLEDs and LCD
• Make arduino as web server on the internet
• Writing own library

Arduino: Mastering Basic Arduino: The Complete Beginner’s Guide To Arduino 

BY (AUTHOR): Steve Gold
Rating: 4

We all know, while working with an arduino board, we have lots of question and doubt. So everyone needs a step by step guide to do a different task related to arduino like setup the board, installing the software, drivers and creating the sketch and uploading to the arduino board.

Even all the part is simple but it covered in this book. Book has less number of projects for the beginners.

Conclusion

Based on the key highlights and insights of the books, here first two or three books are best book to learn arduino programming. You can select any book that is appropriate for you based on the content.

If you are thinking that all Arduino programming books are very basic. And you need some advanced programming book includes IOT, WiFi, Bluetooth, I2C, SPI and GPS like projects.

Then you must read our article 5 Arduino Cookbook Review: Why You Should Read Before Buying.